Initial Commissioning - geberit AquaClean Sela Instrucciones De Montaje

Initial commissioning

Putting the Geberit AquaClean
Sela into operation
Prerequisites
Function tests with the control panel and with the
remote control have been completed successfully.
1
Remove the spray shield.
2
Clean the Geberit AquaClean Sela.
3
Close the WC seat and WC lid.
Result
The Geberit AquaClean Sela is ready for operation.
B1070-005 © 08-2015
966.102.00.0 (04)
1
2
User detection modes
User detection is set at the factory to standard
mode and can be changed to hotel mode.
In hotel mode, shower actuation is only
possible if a user is detected on the WC
seat.
Figure 1: Standard mode
Figure 2: Hotel mode
100–150
15–20
EN
27