OBJ_BUCH-3068-001.book Page 14 Tuesday, February 21, 2017 7:35 AM
14 | English
Rotational Airflow
The bagless filter system removes the need to use dust bags.
Dirt is collected on the inside wall of the container.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Container
2 Latch of the vacuum cover
3 On/Off button
4 Battery charge-control indicator
5 Vacuum lid
6 Carrying handle
7 Adapter for vacuum hose/floor nozzle bracket
8 Hose connection piece
9 Fastening eyes
10 Adapter for suction tube/crevice nozzle bracket
11 Battery compartment cover unlocking button
12 Battery lid
13 Vacuum hose
14 Extraction adapter*
15 Curved nozzle
16 Crevice nozzle
17 Floor nozzle
18 Vacuum tube
19 Battery port
20 Battery pack*
21 Battery unlocking button
22 Bracket for suction tube and crevice nozzle
23 Bracket for vacuum hose and floor nozzle
24 Fixing bolt for bracket 23
25 Snap-fastener
26 Air diffuser
27 Filter
28 Filter bracket
29 Retaining strap of the vacuum hose
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the vacuum
cleaner is 79 dB(A). Uncertainty K=2 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60335-2-69:
2
2
a
<2.5 m/s
, K=1.5 m/s
.
h
1 609 92A 3MV | (21.2.17)
Technical Data
Cordless wet/dry vacuum cleaner
Article number
Voltage
Rated power input
Protection class
Container volume (gross)
Net volume (for fluids)
1
Max. vacuum pressure
2
– Dust extractor
– Turbine
1
Max. flow rate
2
– Dust extractor
– Turbine
Dust category
Weight according to EPTA-
Procedure 01:2014
Permitted ambient
temperature
– during charging
3
– during operation
and during
storage
Recommended batteries
Recommended chargers
Operating duration per battery-
pack charge
1
depending on the battery pack being used
2
measured with vacuum hose 13 and curved nozzle 15
3
limited performance at temperatures <0 °C
Assembly
Battery Charging
Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery pack used in your vacuum cleaner.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". A protective circuit
switches the cordless vacuum cleaner off when the battery is
drained.
After the automatic shut-off of the vacuum cleaner, do
not continue to press the On/Off button. The battery
pack could become damaged.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
GAS 18V-10 L
3 601 JC6 3..
V
18
W
260
IPX4
l
10
l
6
hPa
90
hPa
115
l/s
24
3
m
/h
86
l/s
34
3
m
/h
122
L
kg
5.5
°C
0...+45
°C
–20...+50
вBA 18V..
вBA 18V... W
вAL 18... W
min/Ah
4
Bosch Power Tools