Saber R33CC0312 Manual De Instrucciones página 5

Procedure - Continuing the Leak Check
WARNING
Failure to correct a gas leak could potentially result in a fire,
causing personal injury or property damage.
DO NOT use your grill until it has been leak-tested. If you detect a leak
at any time, STOP! Turn off the gas at the LP cylinder valve and
correct the leak. If you cannot stop a gas leak by closing the LP
cylinder valve, leave area and call your fire department!
DO NOT smoke during the leak check
Ÿ
DO NOT use an open flame to check for gas leaks
Ÿ
Grill must be checked in a well ventilated area, away from ignition
Ÿ
sources such as gas fired or electrical appliances.
During the leak check, keep grill away from open flame or sparks.
Ÿ
1. Turn all Grill Control Knobs to the OFF ( )
position.
2. Be sure the Regulator is tightly connected to LP Cylinder.
3. Completely open LP Cylinder Valve by turning the hand wheel
counterclockwise. If you hear a continuous rushing sound, turn the
gas off immediately. There is a major leak at the Cylinder Valve
connection.
Correct before proceeding.
4. Brush the 50/50 soapy solution onto areas shown at the right.
5. If "growing" bubbles appear, there is a leak. Close the LP
Cylinder Valve immediately and re-tighten connections.
If leaks cannot be stopped - do not try to repair
them. Call Saber Grills for help in getting
replacement parts.
6. Always close the LP Cylinder Valve after performing the leak test by
turning hand wheel clockwise until it is securely shut.
Once you have successfully leak checked your grill,
6
reinstall your Grease Tray.
Your grill is now ready to use!
© Saber Grills, LLC © Saber Grills, LLC
All manuals and user guides at all-guides.com
5
Printed in U.S.A. Printed in U.S.A.
sabergrills.com sabergrills.com
80028081 ● 09/13/17 ● Revision 03