Statement 191-Vcci Class A Warning For Japan; Statement 284-Ac Power Grounding Warning; Statement 342-Before Connecting To System Power Supply; Statement 371-Power Cable And Ac Adapter - Cisco Catalyst 9600 Serie Manual Del Usuario

Regulatory Compliance and Safety Information Cisco Catalyst 9600 Series Switches
Statement 191 VCCI Class A Warning for Japan
Warning
This is a Class A product based on the standard of the VCCI Council. If this equipment is used in
a domestic environment, radio interference may occur, in which case, the user may be required
to take corrective actions.
Statement 284 AC Power Grounding Warning
Warning
AC connected units must have a permanent ground connection in addition to the power cable
ground wire. NEBS-compliant grounding satisfies this requirement.
Statement 342 Before Connecting to System Power
Supply
Warning
High touch/leakage current – Permanently connected protective earth ground is essential before
connecting to system power supply.
Statement 371 Power Cable and AC Adapter
Warning When installing the product, please use the provided or designated connection cables/power
cables/AC adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a
fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that
have the "UL" or "CSA" shown on the cord), not regulated with the subject law by showing "PSE"
on the cord, for any other electrical devices than products designated by CISCO.
Statement 445 Connect the Chassis to Earth Ground
Warning
To reduce the risk of electric shock, the chassis of this equipment needs to be connected to
permanent earth ground during normal use.
Regulatory Compliance and Safety Information Cisco Catalyst 9600 Series Switches
VCCI-A
3