Cleaning And Maintenance; Technical Data - Adler europe AD 8165 Manual De Uso

Level-5 Extremely active" physically demanding exercise/sports or athletic training.
9) Press SET (c) to confirm your choice.
10) Select your height (between 100 – 220cm tall)
NOTE: device is showing weight in kilograms and height in centimeters.
11) Press SET (c) to confirm your choice.
12) Select your age A-18 – A-80 (individuals aged 18 to 80)
13) Press SET (c) to confirm your choice. Scale will show "0.0" on the screen ready to measure weight. Your personal information is saved in
memory.
WEIGHING WITH MEASUREMENT
1) Place the scale on a hard and flat surface. Take off socks, position your feet with maximum contact on the metal plate of the platform.
2) Press the SET (c) button. The last user's memory number and parameters will appear. If you want to change the user or parameters use the
(a) and (b) buttons once parameters are blinking. Wait until the display shows "0" and is ready to weigh.
3) Gently step on the scale platform with bare feet. Both feet should touch the measurement plates (1.3). Stand on the scales evenly
distributing your weight and do not move until your weight reading shown on the display stops changing and the measurement sign:
0000 appears. Once done, the scale will show results in the following sequence: BMI readout, body fat %, body water %, muscle mass %,
basal metabolic rate (kcal), weight (kg,lb,st) . Results will be repeated 2 times then scale will turn off automatically.
AUTOMATIC USER IDENTIFICATION
While you have programmed your personal data into memory and weighted yourself once, the scale will recognize you by your weight. It will
detect all profiles within +/-3 kilograms (6.6lbs). Just step on the platform with bare foot and wait until scale recognize your weight and compare
them with memorized programs. Your weight will display for 2 seconds and then scale will start body composition measurements.
If there is more than one user profile whose weight is close to the person being weighed (within 3kgs) scale will show 2 closest programs that
are conflicting (for example: P1P2). Step off the scale and press down and up buttons to choose your profile.
NOTE: you can delete programs from the memory if they are in conflict. While scale is showing conflicting programs select one of them by
pressing arrows (a or b). Then hold SET button for 3 seconds. Display will show "dEL". Next time the scale is turned on, profile will be deleted
from the memory.
SELECTING UNITS OF MEASURE (Fig.2):
UNIT button is at the back of the scale. Press the UNIT button to change the units of measure. Units of measure: "LB", "KG", "ST.LB". The unit
will be visible on the display.
MESSAGES
Lo – Low battery
Err – Excessive scale load
0000 - During measurement
REPLACING THE BATTERY (Fig.2):
Remove the lid of the battery compartment at the bottom of the scale. Remove the old battery. Insert the new battery of the right type.
Close the lid of the battery compartment.

CLEANING AND MAINTENANCE

Gently wipe the scale with a dry or slightly damp cloth.

TECHNICAL DATA

Power: 3x 1.5V LR03 (AAA) battery
Capacity: 225 kg
Accuracy: 100g
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
SICHERHEITSBEDINGUNGEN. WICHTIGE HINWEISE ZUR GEBRAUCHSSICHERHEIT
BITTE SORGFÄLTIG LESEN UND FÜR ZUKÜNFTIGE VERWEISE AUFBEWAHREN
1. Bevor Sie das Produkt verwenden, lesen Sie es bitte sorgfältig durch und befolgen Sie
immer die folgenden Anweisungen. Der Hersteller haftet nicht für Schäden, die durch
unsachgemäßen Gebrauch entstehen.
DEUTSCH
5