Anexo
A.2 Accesorios
• The following secondary output circuits are supplied by a Limited Power Source: 24 Vdc
output.
• The following output terminals were referenced to earth during performance testing:
Terminal P4 (-) during DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE
MEASUREMENT TEST.
• The maximum investigated branch circuit rating is: 20 A
• The investigated Pollution Degree is: 2
• Proper bonding to the end-product main protective earthing termination is: Required
• An investigation of the protective bonding terminals has: Been conducted
• The following input terminals/connectors must be connected to the end-product supply
neutral:
Please see chapter "AUTOHOTSPOT".
• The equipment is suitable for direct connection to: AC mains supply
• Output is supplied by circuit that complies with NEC Class 2 requirements (additional
evaluation acc. UL1310 has been conducted during the product investigation).
A.2.2
Soportes de transpondedor
Tabla A-10
Vista general de los soportes y distanciadores para transpondedores
Foto del producto
6GT2190-0AA00
6GT2190-0AB00
458
Transpondedores utilizables Características
•
MDS D100
•
MDS D200
•
MDS D400
•
MDS E600
•
MDS E611
•
RF360T
•
MDS D100
•
MDS D200
•
MDS D400
•
MDS E600
•
MDS E611
•
RF360T
•
Distanciador para el montaje sobre metal con la funda
de fijación 6GT2190-0AB00
•
Distancia del transpondedor al metal: 25 mm
•
Fijación: 4 tornillos M4
•
Material: PA6
•
Peso: 31 g
•
Dimensiones (L x An x Al): 110 x 62 x 24 mm
•
Funda de fijación combinada con el distanciador
6GT2190-0AA00
•
Fijación:
– Encaje en el distanciador
– 2 tornillos/clavos
– Grapas
•
Material: PA6
•
Peso: 12 g
•
Dimensiones (L x An x Al): 121 x 57 x 5 mm
Manual de sistema, 02/2021, C79000-G8978-C345-09
SIMATIC RF300