EAS ELECTRIC EMRH908TX Manual De Instrucciones página 31

CONNECTIONS
DUCTED
EXHAUST
When installing the ducted
version, connect the hood to
the chimney using either a
flexible or rigid pipe ɸ 150 or
ɸ 120 mm, the choice of
which is left to the installer.
• If to install a ɸ 120 mm air exhaust
connection, insert the reducer flange 3 on
the hood body outlet.
• Fix the pipe 4 in position using sufficient pipe
clamps (not supplied).
• Remove possible charcoal filters.
Upper Decorative Chimney
Insert the upper
•
decorative chimney 2.2
into the lower decorative
chimney 2.1 and drag it up
to the horizontal line B
Connect upper
•
decorative chimney 2.2
and chimney fixing bracket
21 with 2 screws 12 .
VERSION
SYSTEM
AIR
31
2 screws (STA 4.2*9.5)
V.1
B