Troubleshooting Guide - Hatco Toast-Max TM-10H Serie Manual De Instalación Y Funcionamiento

WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Symptom
Toast too light.
Toast too dark.
Unit toasts on one side only.
Toaster trips the circuit breaker or
GFCI.
Form No. TMCEM-0212
Probable Cause
COLOR CONTROL knob set on a light
setting.
Unit not warmed up. The toaster needs time
to heat up when initially turned on.
Supply voltage to unit is low.
COLOR CONTROL knob set on a dark
setting.
Supply voltage to unit is high.
Selector switch is in the BUN position (one-
sided toasting).
Heating element defective.
Circuit breaker is not sized properly for the
toaster.
Wiring fault inside toaster.

TROUBLESHOOTING GUIDE

ELECTRIC SHOCk HAzARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, maintenance, or
attempting to clear a jam.
Turn COLOR CONTROL knob to a darker
setting.
Allow approximately 15 to 20 minutes for the
unit to warm up.
Verify the supply voltage to the toaster matches
the unit specifications.
Turn COLOR CONTROL knob to a lighter
setting.
Verify the supply voltage to the toaster matches
the unit specifications.
Place the selector switch in the BREAD
position (two-sided toasting).
If the element does not glow, contact
Authorized Service Agent or Hatco for
assistance.
Check circuit breaker for proper sizing.
Contact Authorized Service Agent or Hatco for
assistance.
9
WARNING
Corrective Action