Zoeller Z Control Apak 10-4013-A Instrucciones De Instalación página 6

4. Once the APak 's Z Control
®
Location, and choose Add New Device. Follow the directions to add your APak
APak product tile will appear in your account.
®
The Apak is capable of "over the air" firmware updates. It's possible that the APak
®
Control Cloud. If an update is taking place, the Z Control
®
be solid and all other LEDs will turn off while the update is being installed. After up to 1 minute, the APak
The APak 's alert history on the Z Control
®
occur.
Figure K
Congratulations! Your APak is online. You can now open the product's configuration by clicking the "View" button to modify the APak
®
settings.
You can also install the Z Control
®
for easy access to device information. Silence, Reset, and Test functionality is also included. The app is not currently designed for setting up Wi-Fi
account, or adding devices. These steps can only be done through the web interface (using a mobile device to access the web interface is fine). Setting up the
APak to use your Wi-Fi is completed by connecting to the APak
® ®
LED is solid, log in to your account (or create one) at zcontrolcloud.com (see Figure K). Click the Edit button next to a
®
Cloud will also be updated with the firmware upgrade information, and nofication to email accounts will
®
mobile app on your mobile device (Android and iOS versions available, search "Z Control" in the app stores). This app allows
's internal Wi-Fi
®
© Copyright 2018 Zoeller
by either auto-detect or entering the Device I.D. When successful, an
®
could perform an update immediately if one is available at the Z
®
LED will flicker for up to 1 minute while the update is downloaded. The Z Control
®
(as discussed in the above Connection Steps).
®
Co. All rights reserved.
®
6
will restart and return to normal operation.
®
Select Add New Device
When you add the correct
Device ID, an APak product tile
®
will appear in your account
's device and notification
®
, creating an
®
LED will
®