Ec Declaration Of Conformity - Worx WG205E Traducción De Las Instrucciones Originales

PLUG REPLACEMENT(UK &
IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
blue = Neutral
brown = Live
As the colors of the wires in the electrical cord
of this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected to
the terminal which is marked with N. The wire
which is colored brown must be connected to
the terminal which is marked with L.
WARNING! Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved 13Amp BS1363/A
plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
14 14
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Hedge trimmer
13
EC DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Theodor-Heuss-Ring 1-3
50668 Köln
Declare that the product
Description WORX Hedge trimmer
Type WG205E WG206E WG207E
WG208E (2-designation of machinery,
representative of Hedge Trimmer)
Function
The machine is intended for cutting and
trimming hedges and bushes in domestic
use
Complies with the following directives,
EC Machinery Directive 2006/42/Ec
EC electromagnetic compatibility directive
2004/108/Ec
Noise emission in the environment by
equipment for use outdoors directive
2000/14/Ec amended by 2005/88/Ec
- Conformity assessment procedure as per
Annex V
- Measured sound power level
97.4db (WG205E WG206E)
101.5db (WG207E WG208E)
- Declared guaranteed sound power level
98db (WG205E WG206E)
102db (WG207E WG208E)
Standards conform to,
EN 60745-1
EN 55014-1
EN 61000-3-2
EN ISO 3744
The person authorized to compile the
technical file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO box 152,Leeds,LS10 9DS,UK
2011/12/15
Leo Yue
POSITEC Quality Manager
EN 60745-2-15
EN 55014-2
EN 61000-3-3
EN