Attaching The Hood; Removing The Hood - FujiFilm MK Serie Manual Del Propietário

Attaching the Lens to the Camera
When attaching lenses, ensure that dust or other foreign matter does not enter the camera and be careful
not to touch the camera's internal parts. Do not press the lens release button while attaching the lens and
be sure the latch has securely clicked into place.
Q
Before using the lens for the fi rst time or after attaching it to a diff erent camera, measure the fl ange-back
P
distance ( EN-7).
Q
The procedure for attaching the lens may diff er depending on the camera.
The Lens Hood
The hood attaches and detaches as described below.
Remove the body cap from the camera and the rear
cap from the lens. Place the lens on the mount, keep-
ing the marks on the lens and camera aligned, and
then rotate the lens until it clicks into place. Note that
in some cases there may not be a mounting mark on
the camera body.
Hood mounting mark
■
Loosen the hood lock knob by rotating it counter-
clockwise and slide the hood onto the lens until it
contacts the raised ridge. Rotate the hood to align the
lock knob with the hood mounting mark on the lens
and tighten the lock knob.
Hood lock knob
■
Loosen the hood lock knob by rotating it counter
clockwise and slide the hood straight forward off the
lens.
ENGLISH

Attaching the Hood

Removing the Hood

EN-5