Attaching The Hood; Removing The Hood - FujiFilm MK18-55mmT2.9 El Manual Del Propietario

Attaching the Lens to the Camera
E
Example
• When attaching lenses, ensure that dust or other foreign matter does not enter the camera.
• Be careful not to touch the camera's internal parts.
• Rotate the lens until it clicks into place.
• Do not press the lens release button while attaching the lens.
Q
Before using the lens for the fi rst time or after attaching it to a diff erent camera, measure the fl ange-back
P
distance ( EN-9).
Q
The procedure for attaching the lens may diff er depending on the camera.
The Lens Hood
E X
Example
Hoods for diff erent lenses have diff erent
shapes. Be sure to use the correct hood.
Q
Use the lens hood cap with the lens hood.
Q
Using the wrong hood may cause vignett-
ing or other undesired results.
X
Example
Hood mounting mark
Hood lock knob
1
Remove the body cap from the camera and the
rear cap from the lens.
2 Place the lens on the mount, keeping the lens in-
dex (E) or mounting mark (X) aligned with the
mounting mark on the camera body.
Q
Note that in some cases there may not be a mount-
ing mark on the camera body

Attaching the Hood

■
• Loosen the hood lock knob by rotating it counter-
clockwise.
• Slide the hood onto the lens until it contacts the
raised ridge.
• Rotate the hood to align the lock knob with the
hood mounting mark on the lens.
• Tighten the lock knob.

Removing the Hood

■
• Loosen the hood lock knob by rotating it counter-
clockwise.
• Slide the hood straight forward off the lens.
E MK 18-55 mm
X MKX 18-55 mm
ENGLISH
(E only).
E MK 50-135 mm
X MKX 50-135 mm
EN-7