Scanner Indicator Lights - Kodak P461 Guia Del Usuario

No. Name
 Transparency output
slot

Photo output slot
 SD/xD/MMC/
MS Card slot
Bottom View
 Recommend using NiMH rechargeable type batteries. We do not recommend or support alkaline batteries. For
acceptable battery life, and to make sure your scanner operates dependably, use recommended batteries. There is
no battery charging function in the scanner.
S c a n n e r I n d i c a t o r L i g h t s
Listed below are the indicator light patterns and the functions they represent:
Status
Power
/Card




(orange)



(green)
Rear View
Function/ Description
The scanned transparency (like filmstrips or mounted slides) exits from this slot.
The scanned non-transparent original (like photos or business cards) exit from this slot.
Accepts the following types of memory cards: SD, xD, MMC and MS. Also accepts
MICROSD Cards with an SD adapter. (Refer to "Supported Memory Cards" on page 7.)
Blinking slowly

Steadily on
The scanning resolution setting is indicated by color of Status/Card light
600dpi (default) – The scanner is ready for use in 600dpi mode (default).
300dpi – After scanner is ready in 600dpi mode, press the power button again for 300dpi mode.
Blinking rapidly

Off

Customer Support: http://www.pandigital.net/kodaksupport
Battery Compartment
For installing four AAA
(UM-4) batteries.
(Batteries not included)
5