Connect Scanner To A Computer; System Requirements - Kodak P461 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

 When scanning over-exposed, older or lighter color (faded) filmstrip originals, an irregular auto-
cropping may occur. Cut the filmstrip into individual films and rescan them.
C o n n e c t S c a n n e r t o a C o m p u t e r
By connecting the scanner to a computer, you can access the scanned pictures on the memory card directly, or use the scanner
as a memory card reader, so that you can freely copy, paste or delete files to and from the memory card using the computer.

System Requirements

Operating system: WINDOWS XP, WINDOWS VISTA, WINDOWS 7 or later versions (32 bit)
USB Port Supported: USB 1.1 or 2.0 port
1. Connect the plug on the power adapter cord to the power connector on the scanner.
2. Plug the power adapter into an electrical outlet.
3. Insert an unlocked (writable) SD memory card into the memory card slot.
4. Connect the mini end of the USB cable (included with scanner) to the Mini USB connector on the
5. Turn on your PC, and then connect the large end of the USB cable to a USB port on your computer.
6. Press the Power button; the power indicator light blinks. (For more information, refer to "Indicator
The scanner is recognized by the computer as a removable disk. Now you are ready to view or edit the files on the
memory card.
For WINDOWS VISTA Users
When the PC recognizes the scanner, with an inserted memory card, an
"Auto Play" pop-up window appears.
To view photos on the PC while scanning, change WINDOWS EXPLORER
setting as follows:
Always do this for pictures
1. Check the
Open folder to view files
2. Select
3. When the scanner connects with the PC, an additional drive is listed in the
EXPLORER window. If you are using the KODAK SD memory card, the
KODAKSCN [drive letter]
drive is titled
If you are using your own memory card, the drive is titled
Disk [drive letter]
assigned to your memory card.
 Do not select "Take no Action" or "Set AutoPlay to defaults in Control
Panel".
Macintosh: MAC OS 10.5, 10.6, or later versions
 The type of power plug and socket illustrated may differ from that of your region.
 Memory card is required. The scanned picture files are stored on an inserted memory card, and
then you can access the scanned pictures with WINDOWS EXPLORER or VISTA Photo Import
Wizard.
scanner.
Lights" on page 5.)
CAUTION: Do not remove the memory card while the computer is accessing the files on it.
checkbox.
option.
.
or the personalized title you may have previously
Removable
Customer Support: http://www.pandigital.net/kodaksupport
13

Publicidad

Tabla de contenido
loading

Tabla de contenido