Kärcher BD 17/5 C Manual Del Usuario página 13

Operating instructions
Installing optional
accessories
! Attach cleaning agent tank to
unit
! Attach the cleaning agent hose
to the unit
BD 17/5 C
Connect to the mains
— Only work with dry hands
— The mains voltage must agree
with the voltage specified on
the rating plate
— Always completely unwind
extension cable
— Only connect splash-proof
extension cables
— Extension cable must not be in
water
See -Technical Data- for
connected loads
! Set switch (1) to "0"
! Insert power plug
Operation
! Set switch (1) to "1" and adjust
speed at regulator (2)
English
Warning!
When in operation, the unit must
at all times be kept moving!
Do not keep the unit working on
one spot, since this can cause
damage to the floor covering!
Do not start an unfilled appliance
on delicate floors.
! Apply cleaning agent solution
on surface to be cleaned or
turn on tap at cleaning agent
tank (optional accessory).
! Manually guide the unit over
the surface to be cleaned.
! Do not press the unit onto the
surface to be cleaned. Its dead
weight suffices for brush
contact pressure.
! Repeat the action if the surface
is very dirty.
! Then collect the dirty water with
a wet/dry vacuum cleaner or
with an absorbent cloth.
13