Operating instructions
Use
Recommendations on speed
adjustment, accessories and
cleaning agents for some
applications.
Primary cleaning
Speed 350 - 470
Red brush
RM 69 ASF
Primary cleaning/sealing
removal
Speed 350 - 470
Green brush
RM 752 / RM 752 Lino
General cleaning
Speed 470
Pad drive disk + red pad
RM 748
Sealing
Speed 470
Pad drive disk + sealing pad 3M
RM 749
Shampooing carpets
Speed 350
Blue brush
RM 768
BD 17/5 C
After operation
Warning!
Comply with statutory regulations
on the disposal of cleaning agent
solutions
! Switch off unit and pull the
power plug
! Detach cleaning agent tank
(optional accessory) and pour
out the unused cleaning agent
solution
! Rinse cleaning agent tank
(optional accessory) with clean
water
! Dismount the brush wheel
attachments upon completion
of the job
Cleaning and
maintenance
— Only use a damp cloth for
cleaning the cleaner
— Wipe afterwards with a clean,
dry cloth
— Do not use chemical cleaning
agents
Frost protection
— Store the cleaner in a room
protected from freezing
— Empty the cleaning agent tank
(optional accessory)
Fault instructions
Unsatisfactory cleaning results
! Replace worn brush wheel
attachment /pad
! Check that the brush wheel
attachment or pads and the
cleaning agent are appropriate
to the job on hand
Brush wheel attachment /pad
drive disk does not rotate
! Remove jammed foreign
bodies
! Adjust speed at the
potentiometer
! Adapt brush wheel
attachment /pad to surface to
be cleaned
English
Cleaner runs unevenly or
vibrates heavily
! Check proper fit of brush wheel
attachment /pad drive disk
No or insufficient cleaning
agent solution on the floor
! Refill cleaning agent tank
(optional accessory) with
cleaning agent solution
The unit must be checked by
after sales service if the
problem cannot be remedied.
14