Maintenance And Cleaning; Replacement Parts And Wearing Parts; What If There Are Problems; Technical Data - Beurer ELLE FCE 90 Instrucciones Para El Uso

5. Maintenance and cleaning

• When you are not using the device, store it in a cool, dry place away from direct light.
• Carefully clean the device after every use with a cleaning cloth. If necessary, use a slightly damp cloth.
Ensure that no water gets inside the device while cleaning it.
• Do not use any cleaning agents or solvents, as they could damage the device.
• Under no circumstances should you hold the device under water, as this can cause liquid to enter and
damage the device.

6. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address (according to
the service address list). Please state the corresponding order number.
Item
Advanced Hydro Lift Cream (30 ml)
Intensive Cleansing Milk (200 ml)

7. What if there are problems?

Problem
There is nothing shown in the
device display
The heat and cool function is
not working
8. Disposal
Observe the local regulations for material disposal. Dispose of the unit in accordance with EC
Directive 2002/96/EC – WEEE (Waste Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities responsible for waste disposal.

9. Technical data

Model no.
Input
Output
Cause
The mains adapter is not
plugged in correctly.
The device is not switched on.
The mains cable is damaged.
The device is damaged
FCE 90
AC 100-240 V / 50~60 Hz / 0.5 A
DC 6.5 V / 2.46 A
Item number and/or order number
163.392
163.394
Solution
Check that the mains adapter is
correctly plugged in.
Press the ON/OFF button.
Contact your retailer.
14