Ceiling Fan Assembly - Emerson CF930LBS00 Manual Del Propietário

3.1
Remove and discard the two Cardboard Shipping
Retainers securing the Motor Hub in the Fan
Motor Housing Assembly (Figure 1).
3.2
Slide a Blade through the Fan Motor Assembly Center
Blade Slot.
Mount the Blade to Fan Motor Assembly using three
M5 x 12 mm Washer Head Blade Screws (supplied)
(Figure 2).
NOTE: Take care not to scratch Fan Motor
Assembly when installing Blades.
Complete the remaining Four Blades installation per the
above instructions.
A spare M5 x 12 mm Washer Head Blade Screw is
supplied in the loose parts bag, if required.
WARNING
!
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
3.3
Remove One of the Three #8-32 x 10 mm Serrated Pan
Head Screws in the Fan Motor Assembly and loosen
the remaining Two #8-32 x 10 mm Serrated Pan Head
Screws (Figure 3).

3. Ceiling Fan Assembly

IMPORTANT
CARDBOARD
Figure 1 SHIPPING RETAINER (2)
M5 x 12 mm WASHER
HEAD BLADE SCREWS
(3 per blade)
Figure 2
Figure 3
Please contact 1-800-654-3545 for further assistance
5
PROTECTIVE PLASTIC BAG
IMPORTANT
CENTER SLOT
FAN
HOUSING
SLIDE FAN BLADE
INTO CENTER SLOT
FAN BLADE
REMOVE ONE #8-32 x 10 mm
SERRATED PAN HEAD SCREW
FAN MOTOR ASSEMBLY
LOOSEN TWO #8-32 x 10 mm
SERRATED PAN HEAD SCREWS
emersonfans.com
U.L. Model No.: CF930L