Krups XP6180 Manual De Instrucciones página 12

KR_ESPRESSO_XP6180_NC00023127-03_Mise en page 1 09/03/12 09:50 Page12
English
Once the espresso machine is switched on and heated , the light above "POWER" button will be red and
the lights above the "MANUAL", "SINGLE ESPRESSO" and "DOUBLE ESPRESSO" buttons will show
a constant green light, the coffee maker is able to use the single espresso operation. Simply press the
single espresso button once to start and the pour of liquid espresso will stop automatically.
IMPORTANT: Once the single espresso operation is activated, before the espresso pour starts, the pre-
infusion will release three short bursts of gradually increasing water pressure onto the coffee
cake. After this full water pressure is applied and the espresso will pour freely.
NOTE: Once the single espresso operation is activated the lights above the "MANUAL" and "DOUBLE
ESPRESSO" buttons will go off. The lights above the "POWER" and "SINGLE ESPRESSO"
buttons will remain on.
NOTE: You do not need to press the "SINGLE ESPRESSO" button again to end the pour as the espresso
machine will stop automatically. Once the pour of liquid espresso stops, the espresso machine is
ready to make another espresso.
NOTE: When using the single espresso operation you can stop the pour of espresso at any time by pressing
the "MANUAL", "SINGLE ESPRESSO" or "DOUBLE ESPRESSO" operation buttons.
Double espresso
The "DOUBLE ESPRESSO" function removes the guesswork and is programmed to pour 2 ounces of
liquid espresso.
Tip: We recommend using the double cup filter when using the programmed double espresso operation.
Once the espresso machine is switched on and heated , the light above the "POWER" button will be red
and the lights above the "MANUAL", "SINGLE ESPRESSO" and "DOUBLE ESPRESSO" buttons will
show a constant green light, you are now able to use the double espresso operation. Simply press the
double espresso button once to start and the pour of liquid espresso will stop automatically.
IMPORTANT: Once the double espresso operation is activated, before the espresso pour starts, the pre-
infusion will release three short bursts of gradually increasing water pressure onto the coffee
cake. After this full water pressure is applied and the espresso will pour freely.
NOTE: When the double espresso operation has been activated the lights above the "MANUAL" and
"SINGLE ESPRESSO" buttons will go off. The lights above the "POWER" and "DOUBLE
ESPRESSO" buttons will remain on.
NOTE: You do not need to press the "DOUBLE ESPRESSO" button again to end the pour as the espresso
machine will stop automatically. Once the pour of liquid espresso stops, the espresso machine is
ready to make another espresso.
NOTE: When using the double espresso operation you can stop the pour of espresso at any time by pressing
the "MANUAL", "SINGLE ESPRESSO" or "DOUBLE ESPRESSO" operation buttons.
Program
The program function allows you to personalize and save your own espresso pour settings.
NOTE: Refer to the section "Programming your espresso machine" to follow instructions
Once the espresso machine is switched on and heated , so the light above the "POWER" button is red
and the lights above the "MANUAL", "SINGLE ESPRESSO" and "DOUBLE ESPRESSO" buttons show
a constant green light, you are able to use the program function. To activate the program function, simply
press the "PROGRAM" button.
NOTE: When the program function has been activated the light above the "PROGRAM" button will show
a constant red light and the light above the "MANUAL" button will go off. Additionally the ligths above
the "POWER", "SINGLE" and "DOUBLE ESPRESSO" buttons will remain on.
NOTE: For more detailed information on programming refer to page 15 "Programming your espresso volume".
12