Activate The Kickscooter; Learning To Ride - Ninebot KickScooter Manual Del Usuario

5 Activate the KickScooter

There are safety risks when learning to ride the KickScooter. You must read the
Riding Safety via the Segway-Ninebot App (hereinafter referred to as App) before your
first ride.
For your safety, your new KickScooter is not activated and will beep constantly after
Power ON.
Until activated, the Kickscooter is limited to 9.3 mph (15 km/h) and cannot be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.1 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate
your KickScooter and enjoy the full performance.
Segway-Ninebot App
Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).
Install the App and register/login.
1
Click "Vehicle"→"Search vehicle" to connect to
3
your KickScooter.
The KickScooter will beep when it has
successfully connected. The Bluetooth icon will
stop blinking and remain illuminated.
Follow the App instructions to activate the KickScooter and learn how to ride safely.
4
You can also check the vehicle's status in the App, and interact with other users. Have fun!
07
Power on the KickScooter. A blinking
2
Bluetooth icon indicates the KickScooter is
ready to connect.
Vehicle Fans Moments Discover Me

6 Learning to Ride

Wear an approved helmet and other protective
gear to minimize any possible injury.
1. Stand on the baseboard with one foot
and push off with the other to start
gliding.
Note: Please check the battery level. Charge the
KickScooter if the battery level is low.
2. Stand stably on the baseboard with both
feet. Press the throttle to speed up when
you are balanced.
Note, For your safety, the motor will not
engage until the KickScooter reaches
1.86 mph (3 km/h).
08