Amica AMM20BI Manual De Instalación página 3

ADJUST SCREW A
SCREW B
SCREW C
TRIM-KIT PLASTIC
COVER
Frame
Electrical connection
The oven is fitted with a plug and must be only connected to a properly installed ear-
thed socket. In accordance with the appropriate regulations, the socket must only be
installed and the connecting cable must only be replaced by a qualified electrician. If
the plug is no longer accessible following installation and all-pole isolating switch must
be present on the installation side with a contact gap of at least 3mm.
BUILT-IN FURNITURE
The built-in cabinet shall not have a rear wall behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.
ACCESSORIES
3