Amica AMM20BI Manual De Instalación página 6

INSTALL THE OVEN
SCREW B
ADJUST HEIGHT
SCREW B
ADJUST SCREW A ADJUST SCREW A
UPPER AIR TUNNEL
TRIM KIT
SCREW B
TRIM-KIT
SCREW B
b) Fix ADJSUT SCREW A on the UPPER AIR TUNNEL of the oven, and fix
the TRIM KIT with SCREW B. Then install the oven into the cabinet.
Make sure that the upper side gap between the TRIM KIT and the oven is
the same as the bottom side.
Make sure that the minimum left side gap between the TRIM KIT and the
oven is at least 9 mm.
Adjust the height of ADJUST SCREW A to keep 1 mm gap between the
ADJUST SCREW A and the top plane of cabinet. Do not trap or kink the
power cord.
6