Declaration Of Conformity - Würth Master DIGA CS-2 POWER Traducción Del Manual De Instrucciones De Servicio Original

Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognized only if the device is in a
non-disassembled state and presented to a Würth
branch office, your Würth sales representative or a
customer service office authorized by Würth.
Technical changes reserved.
We accept no liability for printing errors.
Noise / vibration
The measured values conform to EN 12 549.
Typical measured noise levels (A):
Sound pressure level 97.34 dB (A);
Sound power level 103.38 dB(A).
Wear hearing protection!
The rated acceleration is typically 3.7 m/s2.
The weighted square mean value of the hand arm
acceleration in frequency does not exceed 2.5m/s².

Declaration of Conformity

We herewith declare that this product conforms with
the following standards and directives:
Standards
• EN 292-1/-2, EN 349, EN 563, EN 614-1,
• prEN 792-13, EN 12 096,
• EN 12 549:1999, EN 50 081-1,
• EN 50 082-1, EN 50 144-1, EN 55 022,
• EN 60 335-1, EN 60 335-2-29,
• EN 60 555-2/-3, EN 60 950:2000,
• EN 61 000-3-2, EN 61 000-3-3,
• EN 61 204-3, EN ISO 4871,
• EN ISO 11 688-1, EN ISO 11 690-1,
• ISO 8662-11, ISO 8662-11:1999,
• IEC 1000-4-2/-3/-4
in line with the regulations of the directives:
EC directive
• 2004/108/EC
• 2006/95/EC
• 2006/42/EC.
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
General Manager
Adolf Würth
GmbH & Co. KG
Künzelsau: 0 1.08.2011
General Manager
21