Manufacturer's Declaration; Ec Declaration Of Conformity - Würth BST 350 Traducción Del Manual De Instrucciones De Servicio Original

Warranty
We provide a 3 year warranty in respect of manu-
facturing and material defects for this Würth tool.
Any damage arising is remedied by the supply
of spare parts or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if the
tool is returned fully assembled to a Würth agency,
your Würth sales representative or an authorised
Würth customer service workshop.
We reserve the right to make technical changes.
We accept no liability for printing errors.
Disposal
Do not throw the tool away with
normal household waste. Dispose of
the tool via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally sound manner.
28

Manufacturer's declaration

The tool has been C.I.P. type-tested by
the PTB (Physikalisch-Technische Bunde-
sanstalt - Federal Institute of Physics and
S 825
Metrology) and approved for use under
test number S 825.
The serial number is located on the name plate of
the tool.
We hereby confirm that the powder-actuated tool
BST 350, Art. no. 0864 22, produced by Adolf
Würth GmbH & Co. KG has been type-tested by
the testing authority "PTB BS" (Appointed Body
no. 0102) in accordance with EN 15895 and the
C.I.P. resolutions and is submitted as a design.

EC Declaration of Conformity

We herewith declare that this product conforms to
the following standards and directives:
Standard
• EN 15895
in accordance with the regulations stipulated in the
directive:
EC Directive
• 2006/42/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PCV
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
M. Strobel
Head of Product
Management
Künzelsau: 15/07/2014
Dr.-Ing. S. Beichter
Head of Quality,
Authorized Signatory