Bimar VC76 Folleto De Instrucciones página 11

disconnect the power supply by turning off the control panel
switch, and only then remove the plug from the power socket.
Dry both the plug and the power socket carefully before
reactivating the power socket. Reconnect the plug to the
power socket and then use the appliance. If in doubt, call in
qualified staff.
• Do not move the appliance when it is operating.
• Unplug the appliance when not in use.
• Do not leave the device exposed to the weather (sun, rain, etc.).
• Do not touch the appliance with wet hands or feet.
• Do not pull on the cord to move the appliance.
• Do not pull on the cord to disconnect the plug from the socket.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
• Do not use the appliance with a timer or a programmer or with a
system that can switch on the appliance automatically, to avoid risk
of fire, since a fire risk exists if the appliance is covered or positioned
incorrectly.
• If the appliance breaks down or there is a malfunction, switch off the
appliance and have it checked by qualified personnel; repairs carried
out by unauthorised personnel may be dangerous and invalidate the
guarantee.
INSTALLATION
• After removing the packing materials, check the integrity of the appliance; if you are
unsure, do not use it and ask for qualified professional help. The packing materials
11/36