Gram AHZ Serie Manual De Utilización página 14

3. Press the
4. The display will show the message "Prt".
5. Press the
6. The display will show the message "hAnd".
7. Press the
"Contin".
8. Press the
* Parameter of RS-232 interface:
format of data:
Each 10BIT as a data, the format:
BIT1, BIT2, BIT3, ..........,BIT8, BIT9, BIT10
bIT1:
bIT2----bIT9: Data bit.
bIT10:
baud rate:
14
three times.
to confirm.
key to select the desired mode: "hAnd", "Auto" and
key to confirm the selected mode.
Start bit.
Final bit.
9600 bps.