Baby Monitor - Gigaset E630 Manual De Instrucciones

Ocultar thumbs Ver también para E630:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Gigaset E630-E360A / Turtle LUG - USA en / A31008-XXXXX-XXXX-X-XX / applications.fm / 3/27/15

Baby monitor

During the sounding of the alarm you can turn the volume ø (up) or ÷ (down) continuously
using the side keys.
Deactivating the alarm call/repeating after a pause (snooze mode)
Prerequisite: One alarm call sounds.
¤
Deactivating until the next alarm call: Press OFF.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
Baby monitor
When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset. The baby mon-
itor alarm to an external number is cancelled after approximately 90 seconds.
In baby monitor mode, incoming calls are only signalled on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the
exception of the display keys and pressing the middle of the control key.
You can answer the baby monitor alarm using the Two Way Talk function. Deactivate/activate
the speaker of the handset with this function.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
Caution
Ensure the following points:
u
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must be pointed towards the baby.
u
Activating the function reduces the operating time of your handset. If necessary, place
the handset in the charger.
u
The baby monitor is activated 20 seconds after switching on.
Please always check the functionality when you switch on:
u
Test the sensitivity.
u
Check the connection if you are forwarding the baby monitor alarm to an external num-
ber.
u
Make sure that the answer machine at the target number is switched off.
46
en fr es

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

E630a

Tabla de contenido