Activating/Deactivating Auto Answer - Gigaset E630 Manual De Instrucciones

Gigaset E630-E360A / Turtle LUG - USA en / A31008-XXXXX-XXXX-X-XX / settings.fm / 3/27/15
Setting the display backlight
The display backlight is always lit when the handset is not in the base/charging cradle or when
a key is pressed. Any digit keys pressed appear on the display for pre-dialling.
Ï
You can also activate/deactivate the display backlight for idle status:
v ¤
In Charger: r On / Off
Out of Charger: r On / Off
¤
Save
Note
The handset's standby time can be significantly reduced if the display backlight is activated.
Activating/deactivating Message key flashing
Specify whether receipt of new messages should be displayed on the handset by the message
LED.
¤
In idle status: v
The display shows the number 9.
¤
Press the following keys to select the type of message:
M4
M5
MM
You will see the number 9 followed by your entry (e.g. 975);
the current setting will be flashing in the entry field (e.g. 0).
¤
Press the key Q or to determine the setting for new
messages:
Q
¤
Confirm by pressing OK or go back to the idle display without saving by pressing Back.
Activating/deactivating visual call
Ï
Incoming calls are signalled visually (e.g. in noisy environments).
v ¤
Please note: Changes are only saved permanently in Profile Personal (

Activating/deactivating Auto Answer

When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from
Ï
the charging cradle.
¤
v
Regardless of the setting Auto Answer, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold c for a further 2 seconds while placing
the handset in the charging cradle.
en fr es
¤ ¤ q Display ¤
OK OK
¤
*#Q5#
for messages on the network mailbox
for missed calls
for messages on the answer machine
(only Gigaset E630A
The Message key flashes
(stops when the key is pressed)
The Message key does not flash
¤ ¤ q Telephony
OK
¤ ¤
q Telephony
OK
¤ q Backlight ¤
OK
¢
page 31)
¤ ¤ q LED Call Signal
OK
¤ ¤ ¤
OK Auto Answer
Adjusting the telephone settings
System
975 SET:
[0]
Back
¤
³
Change ( = activated)
¢
page 43).
Change (³ = activated)
OK
25