Column Fi Xing - Bosch TCE 4420 Manual Original

4.2.3 Column fixing
1. Remove the external elastic ring with appropriate
pliers and take off the pin.
2. Align the cylinder rod and the tie rod holes.
3. Insert the air tube in the slot in the machine box.
Robert Bosch GmbH
Initial commissioning | TCE 4420 | 27
4. Fix the column to the cylinder tank by inserting
the pin with a hammer and tighten the fulcrum-pin
screw.
5. Insert again the pin passing through the cylinder
rod and tie rod holes; put back in place the external
elastic ring.
6. Connect the pneumatic lock supply pipe on the
pedal box joint.
1
en
|
1 695 105 426 2010-02-16