Tequipment Agilent E361 Serie Manual De Funcionamiento Y Servicio página 36

Programming Voltage Common to the Minus Output
The output will always be the same or less than the programming voltage.
The M/S2 switch must be in the down position. For best results, place a 0.1µF capacitor
in parallel with R2.
V = (R1 R2) / R2 x V
in
V = R2 / R1+R2) x V
out
Where V is the power supply output voltage.
out
V is the programming voltage.
in
R1 and R2 should be in the 1KΩ to 100KΩ range.
Figure 4
out
in
1-10-3