Temperature Control - Uline MINI PAK'R H-1604 Manual De Instrucciones

AIR CONTROL
Regulates the amount of air in the air cushions.
(See Figure 13)
• For fuller cushions, press the (+) button.
• For less full cushions, press the (–) button.
START
MINI PAK˙R
FP International
NOTE: Air Cushions are designed to be inflated
around 2/3 full. This allows pillows to absorb
shock of impacts during the shipping cycle.
PAGE 5 OF 21
CHANGING MINI PAK'R™ SETTINGS CONTINUED
STOP/RESET
™
air cushion machine
(877) 594-5160
www.fpintl.com
Figure 13

TEMPERATURE CONTROL

Regulates the temperature of the seal bar. (See Figure 14)
• To increase the sealing temperature, press the
(+) button.
• To decrease the sealing temperature, press the
(–) button.
MINI PAK˙R
FP International
NOTE: When the temperature setting is
changed, the Mini Pak'r™ may take a few
moments to raise or lower the temperature. The
green LED flashes during heat-up or cool-down
until the correct temperature is reached.
If air cushions continue to have leaking or burned
through seals, contact Uline Customer Service at
1-800-295-5510.
START STOP/RESET
™
air cushion machine
(877) 594-5160
www.fpintl.com
Figure 14
0521 IH-1604