Operation; Switching On; Continuity Test - Testboy TV 800 Manual De Instrucciones

Operation

Operation
Thank you for purchasing the Testboy
The Testboy TV 800 supports electricians in their daily installation duties. It serves to
®
perform throughout control before the commissioning of electrical systems.
The Testboy TV 800 provides the following functions:
®

Continuity test with 2mA / 200mA testing current

Calibration of the measuring lead resistance

Voltage display via 7 LEDs

High-performance LED torch

Cable break detection

External voltage protection up to 300 V

Up to 6,000 measurements (with regular, daily use) with a single battery
set

Switching on

Press any button to switch on the instrument. The instrument starts in continuity testing
mode. Press the "2/200 mA" button to switch to voltage display mode. This button ena-
bles you to switch back and forth between continuity test and voltage display.

Continuity test

The short range of the measuring instrument (0 – 20 Ω) and the fact that it can be influ-
enced by the test lead resistance means that you should first calibrate the measuring in-
strument before starting the continuity test. The calibration removes the influence of the
test lead. You can perform calibration in 2 mA / 200 mA mode.
16
TV 800.
®
®
Testboy TV 800