Battery Replacement - Tripp-Lite LCDT Serie El Manual Del Propietario

Battery Replacement

Under normal conditions, the original battery in your UPS will last several years. Battery replacement should only be performed
by qualified personnel. Refer to "Battery Warnings" in the Safety section for complete battery safety information.
Your UPS requires two Tripp Lite RBC51 replacement battery cartridges. For further information about replacement compatibility
and ordering, visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm.
To Replace the Batteries:
1. Remove screw at the bottom of the unit's front panel.
3. Remove the battery support bar.
5. Connect the new batteries in exactly the same manner
as the old ones: positive (red) connectors together and
negative (black) connectors together. Carefully push the
batteries back into the UPS.
15-02-071-9332B0.indb 9
2. Carefully pull the front panel away from the UPS.
4. Carefully pull the old batteries from the UPS and
disconnect them.
6. Reinstall the battery support bar and replace the front
panel.
9
2/18/2015 10:17:58 AM