Internal Battery Replacement - Tripp-Lite AG-0358 Serie Manual Del Propietário

Ups monofásico en línea para instalación en rack con pantalla lcd integrada para monitoreo y control
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Internal Battery Replacement

Battery Replacement Door: Under normal conditions, the original battery in your UPS will last several years. However, batteries
are hot-swappable. Battery replacement should be performed only by qualified service personnel. Refer to "Battery Warnings" in the
Safety section. If you require a replacement battery, you can find it at tripplite.com/support/battery/index.cfm. See the chart below
to find the right replacement battery for your UPS system:
UPS Model
SU5KRT3UHV
SU5KRT3UX
SU5KRT3UG
SU5KRT3UHW
SU6KRT3UHV
SU6KRT3UX
SU6KRT3UG
SU6KRT3UHW
See the following diagrams for battery removal and installation procedures.
1
Remove the six front screws from the front bezel, then remove
the bezel from the UPS. Hang the bezel on the available hook.
1
3
Open the battery door.
3
Replacement Battery Cartridge
RBC58-3US
RBC58-3US
RBC58-3US
RBC58-3US
RBC58-3US
RBC58-3US
RBC58-3US
RBC58-3US
2
Loosen the two captive screws securing the battery door.
2
4
Using the handles attached to each tray, pull out the old battery
trays slightly and disconnect the communication cables.
4
30

Publicidad

Tabla de contenido
loading

Tabla de contenido