Accessory (Optional); Fitting/Removing The Toilet Pan Holder And Toilet Pan - Invacare Aquatec Ocean Ergo Manual Del Usuario

Aquatec® Ocean Ergo / Ocean Ergo XL / Aquatec® Ocean 24" Ergo / Ocean 24" Ergo XL

5 Accessory (optional)

WARNING!
Risk of injury
– The assembly of accessories (optional) must
be carried out according to the corresponding
instructions.
5.1 Fitting/removing the toilet pan holder and
toilet pan
The toilet pan F can be inserted/removed with or
without the lid G.
18
1. Remove the seat B from the frame A.
2. Position the ends of the toilet pan holder C into the
holes of the rear cross tube E.
3. Engage the front part of the toilet pan holder with the
front cross tube D.
4. Re-fit the seat to the frame.
5. Place the lid on or remove it from the toilet pan.
6. Hold the toilet pan by its handle H and insert from the
rear side between the toilet pan holder and the seat.
Slightly push down the toilet pan when inserting or
removing.
The lid can be hung on the plastic hook at the
underside of the toilet pan handle.
There is a fill level indicator on the inner wall of
the toilet pan.
1639501-C