Electrolux twinclean Z823 Manual Del Usuario página 16

36
39
42
45
48
16
1180066-21.indd 16
37 38
40 41
43 44
47
46
49
English
If something gets stuck in the vacuum cleaner
If something gets stuck in the vacuum cleaner:
36 Turn off the vacuum cleaner and open the cover at
the front of the unit by lifting the release catch.
37 Lift out the filter holder and the filters.
38 Lift the cover between the filter wells and remove
anything that may have got stuck. Also check the
bottoms of the filter wells for foreign objects.
39 Refit the cover under the catches and close it by
pressing down. Put the filter holder back in place and
close the vacuum cleaner cover.
Cleaning the Max In and carpet/floor nozzles
40 The Max In and the carpet/floor nozzles should be
cleaned frequently to avoid losing suction power. The
easiest way to do this is by using the hose handle.
41 The auxiliary wheels should be carefully pulled
straight out.
42 Clean as required and put them back in the reverse
order.
Cleaning the motorized nozzles
(Certain models only)
Always unplug the vacuum cleaner from the wall outlet
before cleaning.
43 To remove the brush roller cover, push the outer latch
out, and the middle cover to the left, and this will also
free the wheels for cleaning.
44 Lift out the brush roller and clean it. Remove
entangled threads etc. by snipping them away with
scissors. Refit in the reverse order. The auxiliary wheels
should be carefully pulled straight out. Clean as
required and refit in the reverse order (45).
Cleaning the turbo nozzle
(Certain models only)
46 Disconnect the nozzle from the vacuum cleaner tube
and remove entangled threads, etc. by snipping them
away with scissors. Use the hose handle to clean the
nozzle.
Cleaning the dust container
The dust container can be thoroughly cleaned when
emptying.
47 Remove the dust container.
48 Empty it.
49 Remove the cover on the side of the round space by
pulling it straight out.
The dust container can now be wiped off or cleaned. If you
use water, make sure that the cartridge is dry before you
put it back. Refit the cover back on by pushing it straight
in. Put back the dust container.
2/4/08 4:47:41 PM