Dreame VTE1 Manual Del Usuario página 11

Care & Maintenance
Cleaning the Smart Multi-brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush from
the smart multi-brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
18
2. Use scissor to cut off the hairs and fibers
that stick on the roller brush. Wipe the dust
from the notch and transparent cover with
a dry cloth or paper towel. Thoroughly dry
before use.
4. Stand the roller brush upright for at least
24 hours until it is fully dry.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Care & Maintenance
Cleaning the Mini Electric Brush
1. Use a coin as illustrated to rotate the
lock counterclockwise until you hear a
click.
3.Stand the roller brush upright in a well-
ventilated area for at least 24 hours until it
is fully dry.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
2. After unlocking the roller brush, remove
it from the mini electric brush, then rinse
and clean the brush head.
4. Once the mini roller brush is dry,
reinstall it by following the disassembly
steps in reverse.
19