Correct Handling Of Machine; Points In Operation And How To Stop - Makita EBH252U Manual Original De Instrucciones

CORRECT HANDLING OF MACHINE

Attachment of shoulder strap
– Adjust the strap length so that the cutter blade will be
kept parallel with the ground.
For EBH252U, EBH252UG, EBH253U, EBH253UG
NOTE: Be careful not to trap clothing, etc., in the buckle.
Detachment
For EBH252L, EBH252LG, EBH253L, EBH253LG
– In an emergency, push the notches (1) at both sides, and you can detach the
machine from you.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
For EBH252U, EBH252UG, EBH253U, EBH253UG
– In an emergency, push the notches (2) at both sides, and
you can detach the machine from you.
Be extremely careful to maintain control of the machine
at this time. Do not allow the machine to be deflected
toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the
machine at all could result in serious bodily
injury or DEATH.

POINTS IN OPERATION AND HOW TO STOP

Observe the applicable accident prevention regulations!
STARTING
Move at least 3 m away from the place of refuelling. Place the Petrol Brushcutter on a clean piece of ground taking care that the cutting tool
does not come into contact with the ground or any other objects.
A: Cold start
1) Set this machine on a flat space.
All manuals and user guides at all-guides.com
(2)
Lock-off lever
OPERATION
STOP
Throttle lever
(1)
EBH252L/EBH252LG
EBH253L/EBH253LG
1
(1)
Hanger
STOP
Throttle lever
High speed
Low speed
Low speed
High speed
Buckle
EBH252U/EBH252UG
EBH253U/EBH253UG
(1)
OPERATION
Lock-off lever
EBH252U/EBH252UG
EBH253U/EBH253UG