Correct Handling Of Machine - Makita EM4351UH Instrucciones De Manejo Originales

CORRECT HANDLING OF MACHINE

Attachment of shoulder harness
– Adjust the strap length so that the metal blade will be
kept parallel with the ground.
For EM4351UH, EM4350UH
Hold the harness on your back, attach it with the buckle,
and adjust the length of the bands.
NOTE: Be careful not to trap clothing, etc., in the buckle.
For EM4350LH
1) Stand as the band plate closer to you. And let your
arms and head pass through the band.
2) The band plate sits on your back and the adjustors and
hook comes on the right side of your body when you
appropriately equip the harness.
Releasing the machine
For EM4351UH, EM4350UH
– To release the machine, squeeze the sides of the buckle (1) and take off the
shoulder harness.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
For EM4350LH
– To release the machine, release the emergency detachment lever (2) by
pulling strongly with fingers.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
Hanging ring
For EM4351UH
– You can use the ring for hanging something weighing less than 2 kg (4.4 lbs).
NOTICE: Do not hang anything weighing more than 2 kg(4.4 lbs) on the ring.
Anything heavier on the ring can cause it to fail and the item to be
damaged.
CAUTION: Do not hang anything on the ring that can become entangled with
bushes or shrubs. Entanglement can cause loss of balance and
control resulting in personal injury.
(1)
EM4351UH
EM4350UH
Hanger
15
Buckle
Band plate
(2)
2 kg max
EM4351UH
EM4350UH
EM4350LH
EM4351UH
EM4350UH
EM4350LH
EM4351UH