Marshall MG Serie Manual Del Usuario página 2

* EUROPE ONLY - Note: This equipment has been tested and found to comply with the requirements of the EMC Directive
(Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage Directive in the E.U.
* EUROPE ONLY - Note: The Peak Inrush current for the MG10 is 2 amps.
From Jim Marshall
I would personally like to congratulate you on your purchase of
this next-generation Marshall MG amplifier.
As a musician myself, I fully understand what it takes to perform
live in a band situation. In addition to talent, dedication and a lot of
hard work, you also need equipment that does exactly what you
ask of it. From the outset, these solid-state amplifiers had to meet
the tonal expectations of the modern guitarist whilst also
incorporating new and exciting technology. With this goal firmly in
mind, I set my experienced R&D team the task of designing a new
range of affordable MG amplifiers that would deliver essential
modern features together with incredible Marshall tone.
Like all the amplifiers in the new MG range, state-of-the-art
manufacturing and stringent quality control procedures ensure
that these amplifiers meet the high standard of build you have
come to expect from all Marshall products.
Whether this is your first ever Marshall, or is the latest addition to
your arsenal of amps, the tone, flexibility and feel of these
compact, rugged units is guaranteed to deliver the goods – from
bedroom, to backstage, to onstage!
I wish you every success with your new Marshall. Welcome to the
family...
Yours Sincerely,
The Peak Inrush current for the MG10 is 2.5 amps.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS !
Dr. Jim Marshall OBE