Connect The Power And Antenna; Dvd Player, Home Theatre System, Pc - JVC LT-40HW62U Manual Del Usuario

Chapter 1

Connect the power and antenna

To switch on TV after connecting power cord, press O .
Note: Position of power socket varies according to TV model. On certain models, you have to turn on the power
switch first.
Notes: - Disconnect the power cord before connecting devices.

DVD player, home theatre system, PC

Notes: - Before connecting a PC, set the PC monitor refresh rate to 60Hz.
- It is recommended to use as short as possible high quality HDMI cables to avoid possible interferences.
- It is recommended to use 1m long or shorter VGA cable with ferrite beads in case VGA input is available
in TV and TV is connected using VGA cable. Maximum supported VGA resolution is 1920x1080/60Hz.
LAN
Network
connection
Cable
HDMI 3 (ARC) HDMI 2
Or use an HDMI
connection.
EN 4
VGA
DVD player/
Home theater system
Connections
-PR+
-VOL+
OK