Proxxon MICROMOT 230/E Manual página 18

a long service life, however, the machine should
be cleaned with a soft cloth or brush after each
used.
Mild soap or another suitable cleaning agent
may be used in this context. Solvents or cleaning
agents containing alcohol (e.g. petrol, cleaning
alcohols, etc.) should be avoided, since these can
attack plastic casings.
Always keep the apertures required for cooling
the motor free of dust and dirt.
Accessories:
For more detailed information on accessories,
please request our device catalogue from
the address specifi ed on the last page in the
warranty information.
Please note in general:
Proxxon bits and cutters have been designed
to work with our machines, which makes them
optimal for their use.
We will not assume any liability whatsoever
for the safe and proper function of our devices
when using third-party bits and cutters!
Please note:
The mains power input may only be replaced by
our Proxxon Service Department or a qualifi ed
specialist!
5.5 Disposal:
Please do not dispose of this machine in
household waste! The device contains reusable
materials which can be recycled. If you have
any questions about this, please contact your
local disposal company or other appropriate
local facilities.
- 18 -
6 EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: Micromot 230/E
Article number:
On our sole responsibility, we declare that
this product conforms to the following
directives and normative documents:
EU-EMC-Directive 2014/30/EU
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 11.2014
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EG
DIN EN 60745-1 / 01.2010
DIN EN 60745-2-23 / 11.2013
Date: 24.04.2016
Jörg Wagner (Dipl.-Ing.)
PROXXON S.A.
Appliance Safety Division
The CE document authorized agent is
identical with the signatory.
drilling and milling
device
28440