Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
· When the battery is fully charged, the appliance can be used for up to 100 minutes without
de
mains connection. This capacity is attained after approx. 5 - 10 charging cycles.
· When the speed of the battery audibly begins to slow down, the battery has a remaining capac-
en
ity of approx. 2 - 3 minutes. Charging the battery.
· When the battery has fully run down, the machine will switch itself off automatically.
· Note: In case of insufficient maintenance of the blade set, the operating time can be reduced
fr
considerably.
it
Cutting-length adjustment
The cutting length can be adjusted to between 0.7 mm and 3 mm (5 possible positions) using the
es
cutting-length adjustment integrated into the blade set (Fig. 4). To do this, set the adjustment lever
to the desired position and let it snap into place.
pt
Cutting with attachment combs
The appliance can also be operated with attachment combs. In order to achieve the indicated
nl
cutting length, the cutting length adjustment lever should be set to position 1 (Fig. 4). The follow-
ing attachment combs are included as standard: 3 mm, 6 mm, 9 mm, 12 mm, 18 mm and 25 mm
sv
cutting lengths.
no
Attaching/removing the attachment comb
· Slide the attachment comb on to the blade set in the direction of the arrow until it reaches the
fi
limit stop (Fig. 5ⓐ).
· The attachment comb can be removed by pushing it in the direction of the arrow (Fig. 5ⓑ).
tr
Cleaning and Care
· Do not immerse the appliance in water!
pl
· After each use, remove the attachment comb and use the cleaning brush to remove cut hairs
from the housing opening and from the blade set. To do this, remove the blade set (Fig. 6ⓐ)
cs
and press the cleaning lever (Fig. 7). This allows the cut hairs that accumulate between the bot-
tom blade and the top blade to be easily removed using the cleaning brush (EASY CLEANING).
sk
· The charging contacts on the appliance and charging stand should always be kept clean.
· Only wipe the appliance with a soft cloth, which may be dampened slightly. Do not use solvents
or abrasives!
hu
· The blade set can be cleaned with hygienic spray, order no. 4005-7051. Do not use any other
cleaning agents.
sl
· For a long-lasting, good cutting performance, it is important to oil the blade set frequently
(Fig. 8). Use only blade set oil for this purpose, order no. 1854-7935 (200 ml).
ro
· Blade set oil and hygienic spray is available from your dealer or our Service Centre.
· If the cutting performance deteriorates after long use despite regular cleaning and oiling, the
bg
blade set should be replaced.
Automatic Sensor System
ru
To ensure that your new hair cutting appliance enjoys a long service life, the appliance needs to be
cleaned and oiled on a regular basis (see section Cleaning and Care in the user instructions). To
uk
give you advance notice of an urgent need for maintenance care, your hair cutting appliance has
been equipped with an automatic sensor system. This system automatically recognises when the
el
blade set needs oiling or cleaning. Consistent heavy soiling or lack of oil can lead to early wear
and tear of the appliance.
ar
12
Publicidad
