Declaration Of Conformity - STEINEL IS 3180 Manual Del Usuario

BDAL_IS3180_24spr_neu
Operation/Maintenance
The infrared sensor is suitable for switching on
light automatically. The unit is not suitable for
burglar alarm systems as it is not tamperproof
in the manner prescribed for such systems.
Weather conditions may affect the way the
motion detector works. Strong gusts of wind,

Declaration of conformity

This product complies with the European Dir-
ective on Low-Voltage Appliances, 73/23/EEC
and the EMC Directive 89/336/EEC.
Functional warranty
This STEINEL product has been manufactured
with the utmost care, tested for proper operat-
ion and safety in accordance with applicable
regulations and then subjected to random
sample inspection. STEINEL guarantees that it
is perfect condition and proper working order.
The warranty period is 36 months, starting on
the date of sale to the consumer. We will rem-
edy defects caused by material flaws or manu-
facturing faults. The warranty will be met by re-
pair or replacement of defective parts at our
own discretion.
This warranty shall not cover damage to wear-
ing parts, damage or defects caused by im-
proper treatment or maintenance.
Further consequential damage to other objects
is excluded.
25.07.2008 15:09 Uhr
snow, rain or hail may cause the light to come
on when it is not wanted because the sensor is
unable to distinguish sudden changes of tem-
perature from sources of heat. The detector
lens may be cleaned with a damp cloth if it
gets dirty (do not use cleaning agents).
The warranty will only be honoured if the prod-
uct is sent to the appropriate Service Centre
fully assembled and well packed with a brief
description of the fault, receipt or invoice (date
of purchase and dealer's stamp).
Repair Service:
Our Customer Service Department will repair
faults not covered by warranty or occurring
after the warranty period has
expired. Please send the product
well packed to your nearest
Service Centre.
19
Seite 20