Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Standard Installation
4. Connect your M.2 NVMe SSD M-Key drive at a 45°
angle to minimize stress on the connector.
Note: This product only supports PCIe M.2 NVMe M-Key
SSD and does NOT support B-Key/M+B Key SATA SSD or
M-Key M.2 PCIe-AHCI SSD.
5. Holding down the SSD toward the mounting hole
with the inserted nut, secure the SSD to the PCBA
board by screwing the mounting screw to the nut.
6. Slide the PCBA board back into the metal casing
and replace the two cover-plate screws removed in
Step 1.
7. Connect the included USB 3.1 Gen 2 cable
between the USB-C port on the enclosure unit and
the USB-A port on your computer.
4
Publicidad
Tabla de contenido
