Technical Data; Noise Information; English - Milwaukee MS 216 SB Manual Original

TECHNICAL DATA

Mitresaw
Production code
Rated input
Amps
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Max. cutting width
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
Min. workpiece dimensions
Weight according EPTA-Procedure 01/2003

Noise information

Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 61029
Vibration emission value a
h
Sawing of wood
Uncertainty K
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications, with
di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for future reference.
SAFETY WARNINGS MITRESAW
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Connect the saw to a dust-collecting device when sawing wood.
Wear gloves!
Transport and store the tools in a suitable receptacle.
Before using the tool please read the instructions. If possible have the
tool demonstrated.
MS 216 SB
(220-240 V)
4193 01 01...
4109 21 01...
4483 33 01...
4483 35 01...
... 000001-999999
1800 W
8,4 A
6000 min
216 x 30 mm
1,5 mm
60 x 270 mm
60 x 190 mm
48 x 270 mm
48 x 190 mm
130 x 35 x 2 mm
14,5 kg
92,5 dB (A)
105,5 dB (A)
3,2 m/s
1,5 m/s
Ensure that the machine is always stable and secure (e.g. xed to a
bench).
Do not use saw blades which are damaged or deformed.
Do not use saw blades not corresponding to the key data given in
these instructions for use.
Only use tools that meet standard EN 847-1.
Do not use saw blades made of high-speed steel.
It is necessary to select a saw blade which is suitable for the material
being cut.
It is essential to adhere to the maximum speed speci ed on the saw
blade.
Do not use any anges other than those supplied or indicated in the
instruction manual to secure the saw blade.
Never use the mitre saw to cut materials other than those speci ed in
the instruction manual.
Only use the saw with guards in good working order and properly
maintained, and in position.
MS 216 SB
(110-120 V)
4109 26 01...
4483 37 01...
... 000001-999999
1650 W
15 A
6000 min
-1 -1
216 x 30 mm
1,5 mm
60 x 270 mm
60 x 190 mm
48 x 270 mm
48 x 190 mm
130 x 35 x 2 mm
14,5 kg
92,5 dB (A)
105,5 dB (A)
3,2 m/s
2 2
1,5 m/s
2 2

English

21
GB