9: Connecting The Ac Power Cord; Checking The Connections And Settings; Performing Initial Setup Operations - Sony HT-K250 Manual De Instrucciones

9: Connecting the AC
power cord
After connecting the components, connect the
AC power cord of the subwoofer to a wall outlet.
AC power cord
b
To a wall outlet
GB
14
Subwoofer
CONTROL
Checking the connections
and settings
Performing initial setup
operations
Before using the system for the first time,
initialize the system by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
1
Press ?/1 to turn off the system.
2
Hold down ?/1 until "INITIAL" appears
in the display.
The current input name appears.
The following are reset to their factory
settings.
• All settings in the SET UP and LEVEL
and EFFECT menus.
• The sound field memorized for each
input.
• All preset stations.
Besides, the volume is set to minimum
(MIN).
?/1