Installation Requirements - Wolf M Serie Guia De Instalacion

SPECIFICATIONS

Installation Requirements

The convection steam oven can be installed in a standard or
flush inset application. A minimum base support of 100 lbs
is required. The electrical supply for the oven must be
(45 kg)
located in an adjacent cabinet.
For standard installations, face trim will overlap stiles and
rails. Refer to the chart below for trim overlaps.
For flush inset installations, a minimum
required on all four sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°. Finish the edges
of the opening. They may be visible when the door is open.
If the convection steam oven is installed above or below
a Wolf E series oven in a flush inset application, a
reveal is required.
TRIM OVERLAP
OVERLAP
Top
Bottom
Sides
|
4 Wolf Customer Care 800.222.7820
1 / " reveal is
(3)
8
1 / "
(6)
4
24" MODEL 30" MODEL
3 3
/ " / "
(5) (5)
16 16
0" 0"
(0) (0)
11 / " 3 7 / "
(18) (98)
16 8