Before First Use; Battery Operation; Important - auna Roadie Smart Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

BEFORE FIRST USE

Unpacking
Remove all packaging
Check the presence of all parts and for transportation damage, In case
of damage or incomplete delivery, please contact your dealer.
Please keep the packaging. The appliance can be stored if it is not used
for a longer period of time.
Place the appliance on a level, stable, clean and dry surface.
Ensure that there is sufficient ventilation. Keep a minimum distance of
10 cm between the product and other objects or walls.
Mains operation
The appliance can either be powered through a wall outlet or by
batteries.
Insert the power cable into the AC IN~ inlet at the back of the appliance.
Connect the power plug to a suitable wall outlet. Make sure that the
power supply voltage is the same as needed for the appliance.

Battery operation

Disconnect the power plug from the wall outlet before opening the
battery compartment and inserting batteries.
Open the battery compartment at the backside of the appliance.
Insert 8 batteries (1.5 V, battery type LR14 / R14 / C) (not supplied)
according to the polarity markings inside the battery compartment and
on the batteries.
Use batteries of high quality only, Batteries of low quality might leak
and cause damage.
Do not use new and old batteries together. Close the battery
compartment lid after inserting the batteries.

Important:

Do not use the appliance with a wall outlet and batteries at the same
time. Remove batteries before connecting the appliance to mains
power.
If you will not use the appliance for a longer period of time, disconnect
the power plug and remove all batteries.
EN
35

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

1003403110034032

Tabla de contenido