ISO DDIN radio provision
1. Slide the radio brackets into the radio
housing, aligning the holes in the radio
housing to the clips on the brackets.
(Figure A)
2. Slide the radio into the completed
assembly, and then secure using the
screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Test the radio for proper
operation.
4. Secure the completed assembly into the
dash, and then reassemble the dash in
reverse order of disassembly.
Suzuki XL-7 only: Trim the top corners of
the radio housing. (Figure C)
10
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
|
1.800.221.0932
MetraOnline.com